Amrendra Kumar Yadav

MEP engineer, electrical and power systems

Electrical and Electronics Engineer in Kathmandu working across MEP coordination, high-voltage equipment testing, commissioning and electrical system design, on commercial and industrial projects. I work with architects, structural engineers, contractors and consultants to deliver on schedule and within budget.

Email meSee my experience
132 kV Transformer Transformer LV/MV switchgear Distribution Earthing

Experience

March 2026 – present

Electrical Engineer

Delight M and E Pvt. Ltd, Kathmandu

  • Coordinate and supervise MEP installation: electrical, HVAC, plumbing, fire protection and ELV systems, to design specifications and international standards.
  • Review shop drawings, material submittals and method statements across active sites.
  • Inspect sites and resolve technical issues during installation to hold quality and timelines.
  • Coordinate with architectural, structural and interior design teams.
  • Write progress and inspection reports, and attend coordination meetings with stakeholders and consultants.
August 2025 – March 2026

Electrical Engineer

Clean Power T&C, Lalitpur

  • Designed and oversaw electrical installations for commercial and industrial projects, to national electrical codes and IEC/IEEE safety standards.
  • Supervised contractors on electrical distribution systems, monitoring quality and completion dates.
  • Prepared AutoCAD drawings, specifications and technical documentation.
  • Assessed electrical system performance on site and identified improvements.
  • Worked with project managers, contractors and consultants to deliver on schedule and within budget.
May 2025 – August 2025

High Voltage Testing Engineer (Internship)

Clean Power T&C, Lalitpur

  • Ran testing and commissioning procedures for transformers, circuit breakers and switchgear up to 132 kV.
  • Performed insulation resistance, turns ratio, winding resistance and dielectric strength tests on power transformers.
  • Carried out circuit breaker timing tests, contact resistance measurements and protection relay calibration.
  • Kept to IEC and IEEE safety protocols, and prepared technical reports for regulatory compliance and handover to operations.

High-voltage testing I have performed

Skills

Software

AutoCAD, ETAP, DIALux, MATLAB

Electrical systems

HV equipment testing, power distribution, earthing design, LV/MV switchgear, lighting design

MEP coordination

Electrical systems, HVAC coordination, fire protection, ELV systems, BMS overview

Testing and commissioning

Transformer testing, circuit breaker timing, insulation resistance, relay calibration, power quality analysis

Standards and codes

IEC, IEEE, NEC, Nepali Electrical Standards, electrical safety regulations

Documentation

Shop drawing review, material submittals, method statements, progress reports, technical reports

Education

Bachelor of Engineering, Electrical and Electronics (Power and Control)

Kathmandu University, Dhulikhel, Nepal. December 2020 – June 2025.

Amrendra Kumar Yadav – MEP & Electrical Power Engineer

Amrendra Kumar Yadav

MEP engineer, electrical and power systems

Electrical and Electronics Engineer in Kathmandu working across MEP coordination, high-voltage equipment testing, commissioning and electrical system design, on commercial and industrial projects. I work with architects, structural engineers, contractors and consultants to deliver on schedule and within budget.

Email meSee my experience
132 kV Transformer Transformer LV/MV switchgear Distribution Earthing

Experience

March 2026 – present

Electrical Engineer

Delight M and E Pvt. Ltd, Kathmandu

  • Coordinate and supervise MEP installation: electrical, HVAC, plumbing, fire protection and ELV systems, to design specifications and international standards.
  • Review shop drawings, material submittals and method statements across active sites.
  • Inspect sites and resolve technical issues during installation to hold quality and timelines.
  • Coordinate with architectural, structural and interior design teams.
  • Write progress and inspection reports, and attend coordination meetings with stakeholders and consultants.
August 2025 – March 2026

Electrical Engineer

Clean Power T&C, Lalitpur

  • Designed and oversaw electrical installations for commercial and industrial projects, to national electrical codes and IEC/IEEE safety standards.
  • Supervised contractors on electrical distribution systems, monitoring quality and completion dates.
  • Prepared AutoCAD drawings, specifications and technical documentation.
  • Assessed electrical system performance on site and identified improvements.
  • Worked with project managers, contractors and consultants to deliver on schedule and within budget.
May 2025 – August 2025

High Voltage Testing Engineer (Internship)

Clean Power T&C, Lalitpur

  • Ran testing and commissioning procedures for transformers, circuit breakers and switchgear up to 132 kV.
  • Performed insulation resistance, turns ratio, winding resistance and dielectric strength tests on power transformers.
  • Carried out circuit breaker timing tests, contact resistance measurements and protection relay calibration.
  • Kept to IEC and IEEE safety protocols, and prepared technical reports for regulatory compliance and handover to operations.

High-voltage testing I have performed

Skills

Software

AutoCAD, ETAP, DIALux, MATLAB

Electrical systems

HV equipment testing, power distribution, earthing design, LV/MV switchgear, lighting design

MEP coordination

Electrical systems, HVAC coordination, fire protection, ELV systems, BMS overview

Testing and commissioning

Transformer testing, circuit breaker timing, insulation resistance, relay calibration, power quality analysis

Standards and codes

IEC, IEEE, NEC, Nepali Electrical Standards, electrical safety regulations

Documentation

Shop drawing review, material submittals, method statements, progress reports, technical reports

Education

Bachelor of Engineering, Electrical and Electronics (Power and Control)

Kathmandu University, Dhulikhel, Nepal. December 2020 – June 2025.

Amrendra Kumar Yadav

MEP engineer, electrical and power systems

Electrical and Electronics Engineer in Kathmandu working across MEP coordination, high-voltage equipment testing, commissioning and electrical system design, on commercial and industrial projects. I work with architects, structural engineers, contractors and consultants to deliver on schedule and within budget.

Email meSee my experience
132 kV Transformer Transformer LV/MV switchgear Distribution Earthing

Experience

March 2026 – present

Electrical Engineer

Delight M and E Pvt. Ltd, Kathmandu

  • Coordinate and supervise MEP installation: electrical, HVAC, plumbing, fire protection and ELV systems, to design specifications and international standards.
  • Review shop drawings, material submittals and method statements across active sites.
  • Inspect sites and resolve technical issues during installation to hold quality and timelines.
  • Coordinate with architectural, structural and interior design teams.
  • Write progress and inspection reports, and attend coordination meetings with stakeholders and consultants.
August 2025 – March 2026

Electrical Engineer

Clean Power T&C, Lalitpur

  • Designed and oversaw electrical installations for commercial and industrial projects, to national electrical codes and IEC/IEEE safety standards.
  • Supervised contractors on electrical distribution systems, monitoring quality and completion dates.
  • Prepared AutoCAD drawings, specifications and technical documentation.
  • Assessed electrical system performance on site and identified improvements.
  • Worked with project managers, contractors and consultants to deliver on schedule and within budget.
May 2025 – August 2025

High Voltage Testing Engineer (Internship)

Clean Power T&C, Lalitpur

  • Ran testing and commissioning procedures for transformers, circuit breakers and switchgear up to 132 kV.
  • Performed insulation resistance, turns ratio, winding resistance and dielectric strength tests on power transformers.
  • Carried out circuit breaker timing tests, contact resistance measurements and protection relay calibration.
  • Kept to IEC and IEEE safety protocols, and prepared technical reports for regulatory compliance and handover to operations.

High-voltage testing I have performed

Skills

Software

AutoCAD, ETAP, DIALux, MATLAB

Electrical systems

HV equipment testing, power distribution, earthing design, LV/MV switchgear, lighting design

MEP coordination

Electrical systems, HVAC coordination, fire protection, ELV systems, BMS overview

Testing and commissioning

Transformer testing, circuit breaker timing, insulation resistance, relay calibration, power quality analysis

Standards and codes

IEC, IEEE, NEC, Nepali Electrical Standards, electrical safety regulations

Documentation

Shop drawing review, material submittals, method statements, progress reports, technical reports

Education

Bachelor of Engineering, Electrical and Electronics (Power and Control)

Kathmandu University, Dhulikhel, Nepal. December 2020 – June 2025.

Amrendra Kumar Yadav

MEP engineer, electrical and power systems

Electrical and Electronics Engineer in Kathmandu working across MEP coordination, high-voltage equipment testing, commissioning and electrical system design, on commercial and industrial projects. I work with architects, structural engineers, contractors and consultants to deliver on schedule and within budget.

Email meSee my experience
132 kV Transformer Transformer LV/MV switchgear Distribution Earthing

Experience

March 2026 – present

Electrical Engineer

Delight M and E Pvt. Ltd, Kathmandu

  • Coordinate and supervise MEP installation: electrical, HVAC, plumbing, fire protection and ELV systems, to design specifications and international standards.
  • Review shop drawings, material submittals and method statements across active sites.
  • Inspect sites and resolve technical issues during installation to hold quality and timelines.
  • Coordinate with architectural, structural and interior design teams.
  • Write progress and inspection reports, and attend coordination meetings with stakeholders and consultants.
August 2025 – March 2026

Electrical Engineer

Clean Power T&C, Lalitpur

  • Designed and oversaw electrical installations for commercial and industrial projects, to national electrical codes and IEC/IEEE safety standards.
  • Supervised contractors on electrical distribution systems, monitoring quality and completion dates.
  • Prepared AutoCAD drawings, specifications and technical documentation.
  • Assessed electrical system performance on site and identified improvements.
  • Worked with project managers, contractors and consultants to deliver on schedule and within budget.
May 2025 – August 2025

High Voltage Testing Engineer (Internship)

Clean Power T&C, Lalitpur

  • Ran testing and commissioning procedures for transformers, circuit breakers and switchgear up to 132 kV.
  • Performed insulation resistance, turns ratio, winding resistance and dielectric strength tests on power transformers.
  • Carried out circuit breaker timing tests, contact resistance measurements and protection relay calibration.
  • Kept to IEC and IEEE safety protocols, and prepared technical reports for regulatory compliance and handover to operations.

High-voltage testing I have performed

Skills

Software

AutoCAD, ETAP, DIALux, MATLAB

Electrical systems

HV equipment testing, power distribution, earthing design, LV/MV switchgear, lighting design

MEP coordination

Electrical systems, HVAC coordination, fire protection, ELV systems, BMS overview

Testing and commissioning

Transformer testing, circuit breaker timing, insulation resistance, relay calibration, power quality analysis

Standards and codes

IEC, IEEE, NEC, Nepali Electrical Standards, electrical safety regulations

Documentation

Shop drawing review, material submittals, method statements, progress reports, technical reports

Education

Bachelor of Engineering, Electrical and Electronics (Power and Control)

Kathmandu University, Dhulikhel, Nepal. December 2020 – June 2025.

Amrendra Kumar Yadav

MEP engineer, electrical and power systems

Electrical and Electronics Engineer in Kathmandu working across MEP coordination, high-voltage equipment testing, commissioning and electrical system design, on commercial and industrial projects. I work with architects, structural engineers, contractors and consultants to deliver on schedule and within budget.

Email meSee my experience
132 kV Transformer Transformer LV/MV switchgear Distribution Earthing

Experience

March 2026 – present

Electrical Engineer

Delight M and E Pvt. Ltd, Kathmandu

  • Coordinate and supervise MEP installation: electrical, HVAC, plumbing, fire protection and ELV systems, to design specifications and international standards.
  • Review shop drawings, material submittals and method statements across active sites.
  • Inspect sites and resolve technical issues during installation to hold quality and timelines.
  • Coordinate with architectural, structural and interior design teams.
  • Write progress and inspection reports, and attend coordination meetings with stakeholders and consultants.
August 2025 – March 2026

Electrical Engineer

Clean Power T&C, Lalitpur

  • Designed and oversaw electrical installations for commercial and industrial projects, to national electrical codes and IEC/IEEE safety standards.
  • Supervised contractors on electrical distribution systems, monitoring quality and completion dates.
  • Prepared AutoCAD drawings, specifications and technical documentation.
  • Assessed electrical system performance on site and identified improvements.
  • Worked with project managers, contractors and consultants to deliver on schedule and within budget.
May 2025 – August 2025

High Voltage Testing Engineer (Internship)

Clean Power T&C, Lalitpur

  • Ran testing and commissioning procedures for transformers, circuit breakers and switchgear up to 132 kV.
  • Performed insulation resistance, turns ratio, winding resistance and dielectric strength tests on power transformers.
  • Carried out circuit breaker timing tests, contact resistance measurements and protection relay calibration.
  • Kept to IEC and IEEE safety protocols, and prepared technical reports for regulatory compliance and handover to operations.

High-voltage testing I have performed

Skills

Software

AutoCAD, ETAP, DIALux, MATLAB

Electrical systems

HV equipment testing, power distribution, earthing design, LV/MV switchgear, lighting design

MEP coordination

Electrical systems, HVAC coordination, fire protection, ELV systems, BMS overview

Testing and commissioning

Transformer testing, circuit breaker timing, insulation resistance, relay calibration, power quality analysis

Standards and codes

IEC, IEEE, NEC, Nepali Electrical Standards, electrical safety regulations

Documentation

Shop drawing review, material submittals, method statements, progress reports, technical reports

Education

Bachelor of Engineering, Electrical and Electronics (Power and Control)

Kathmandu University, Dhulikhel, Nepal. December 2020 – June 2025.

Amrendra Kumar Yadav

MEP engineer, electrical and power systems

Electrical and Electronics Engineer in Kathmandu working across MEP coordination, high-voltage equipment testing, commissioning and electrical system design, on commercial and industrial projects. I work with architects, structural engineers, contractors and consultants to deliver on schedule and within budget.

Email meSee my experience
132 kV Transformer Transformer LV/MV switchgear Distribution Earthing

Experience

March 2026 – present

Electrical Engineer

Delight M and E Pvt. Ltd, Kathmandu

  • Coordinate and supervise MEP installation: electrical, HVAC, plumbing, fire protection and ELV systems, to design specifications and international standards.
  • Review shop drawings, material submittals and method statements across active sites.
  • Inspect sites and resolve technical issues during installation to hold quality and timelines.
  • Coordinate with architectural, structural and interior design teams.
  • Write progress and inspection reports, and attend coordination meetings with stakeholders and consultants.
August 2025 – March 2026

Electrical Engineer

Clean Power T&C, Lalitpur

  • Designed and oversaw electrical installations for commercial and industrial projects, to national electrical codes and IEC/IEEE safety standards.
  • Supervised contractors on electrical distribution systems, monitoring quality and completion dates.
  • Prepared AutoCAD drawings, specifications and technical documentation.
  • Assessed electrical system performance on site and identified improvements.
  • Worked with project managers, contractors and consultants to deliver on schedule and within budget.
May 2025 – August 2025

High Voltage Testing Engineer (Internship)

Clean Power T&C, Lalitpur

  • Ran testing and commissioning procedures for transformers, circuit breakers and switchgear up to 132 kV.
  • Performed insulation resistance, turns ratio, winding resistance and dielectric strength tests on power transformers.
  • Carried out circuit breaker timing tests, contact resistance measurements and protection relay calibration.
  • Kept to IEC and IEEE safety protocols, and prepared technical reports for regulatory compliance and handover to operations.

High-voltage testing I have performed

Skills

Software

AutoCAD, ETAP, DIALux, MATLAB

Electrical systems

HV equipment testing, power distribution, earthing design, LV/MV switchgear, lighting design

MEP coordination

Electrical systems, HVAC coordination, fire protection, ELV systems, BMS overview

Testing and commissioning

Transformer testing, circuit breaker timing, insulation resistance, relay calibration, power quality analysis

Standards and codes

IEC, IEEE, NEC, Nepali Electrical Standards, electrical safety regulations

Documentation

Shop drawing review, material submittals, method statements, progress reports, technical reports

Education

Bachelor of Engineering, Electrical and Electronics (Power and Control)

Kathmandu University, Dhulikhel, Nepal. December 2020 – June 2025.

Amrendra Kumar Yadav – MEP & Electrical Power Engineer

Amrendra Kumar Yadav

MEP engineer, electrical and power systems

Electrical and Electronics Engineer in Kathmandu working across MEP coordination, high-voltage equipment testing, commissioning and electrical system design, on commercial and industrial projects. I work with architects, structural engineers, contractors and consultants to deliver on schedule and within budget.

Email meSee my experience
132 kV Transformer Transformer LV/MV switchgear Distribution Earthing

Experience

March 2026 – present

Electrical Engineer

Delight M and E Pvt. Ltd, Kathmandu

  • Coordinate and supervise MEP installation: electrical, HVAC, plumbing, fire protection and ELV systems, to design specifications and international standards.
  • Review shop drawings, material submittals and method statements across active sites.
  • Inspect sites and resolve technical issues during installation to hold quality and timelines.
  • Coordinate with architectural, structural and interior design teams.
  • Write progress and inspection reports, and attend coordination meetings with stakeholders and consultants.
August 2025 – March 2026

Electrical Engineer

Clean Power T&C, Lalitpur

  • Designed and oversaw electrical installations for commercial and industrial projects, to national electrical codes and IEC/IEEE safety standards.
  • Supervised contractors on electrical distribution systems, monitoring quality and completion dates.
  • Prepared AutoCAD drawings, specifications and technical documentation.
  • Assessed electrical system performance on site and identified improvements.
  • Worked with project managers, contractors and consultants to deliver on schedule and within budget.
May 2025 – August 2025

High Voltage Testing Engineer (Internship)

Clean Power T&C, Lalitpur

  • Ran testing and commissioning procedures for transformers, circuit breakers and switchgear up to 132 kV.
  • Performed insulation resistance, turns ratio, winding resistance and dielectric strength tests on power transformers.
  • Carried out circuit breaker timing tests, contact resistance measurements and protection relay calibration.
  • Kept to IEC and IEEE safety protocols, and prepared technical reports for regulatory compliance and handover to operations.

High-voltage testing I have performed

Skills

Software

AutoCAD, ETAP, DIALux, MATLAB

Electrical systems

HV equipment testing, power distribution, earthing design, LV/MV switchgear, lighting design

MEP coordination

Electrical systems, HVAC coordination, fire protection, ELV systems, BMS overview

Testing and commissioning

Transformer testing, circuit breaker timing, insulation resistance, relay calibration, power quality analysis

Standards and codes

IEC, IEEE, NEC, Nepali Electrical Standards, electrical safety regulations

Documentation

Shop drawing review, material submittals, method statements, progress reports, technical reports

Education

Bachelor of Engineering, Electrical and Electronics (Power and Control)

Kathmandu University, Dhulikhel, Nepal. December 2020 – June 2025.